How to make a fish pond from used jerry cans - News & Articles - Jerigen Plastik Jakarta Tangerang

Articles & Blogs Category

To make a fish pond from used jerry cans, you can follow the following steps that are commonly used in the available tutorials:

Required Materials

1. Used jerry cans (quantity as needed)

2. Submersible water pump machine (for example, SAKKAI PRO AA 107, 100 WATT)

3. Pipe connection (size 3/4")

4. Pipe elbow (2 pieces, size 3/4")

5. Filter pipe (water inlet size 1" + elbow 1")

Filter media:

1. Netting

2. Zeolite stone

3. Aquarium foam

4. Bio ball and bio ring

Making Steps

1. Jerry can preparation: Wash the used jerry can until clean to remove any remaining chemicals or dirt.

2. Making the Filter:

-. Make a hole in the lid of the jerry can to insert the pipe connection.

-. Arrange the filter media in the jerry can in the following order:

-. Place the netting at the bottom to filter coarse dirt.

-. Add zeolite stone as a second layer to filter fine dirt.

-. Use aquarium foam as the third layer.

-. Add bio balls and bio rings on top to improve water quality.

3. Water Pump Installation:

-. Install the submersible water pump machine inside the jerry can.

-. Connect the pipe from the pump to the connection that has been installed on the jerry can lid.

4. System Testing:

-. Fill the jerry can with water and turn on the pump to make sure the filter system is working properly.

5. Fish Placement: Once the filter system is running well and the water is clean, you can add fish to the pond.

By following these steps, you can create a simple fish pond using used jerry cans that is effective and environmentally friendly

If you are looking for plastic jerrycans with the best quality, then Kadujaya Perkasa is the right choice. Kadujaya Perkasa sells jerry cans with superior quality. Kadujaya Perkasa is a jerrycan factory, HDPE plastic factory, blow moulding factory, and HDPE jerrycan factory that always provides the best products for consumers.